Warnings: This Product is Not an All-Weather Item. This item must be assembled by adults only.
Before using this product, please read and follow these instructions carefully. Keep these instructions for future reference.
This is a seasonal decoration and is not intended for permanent installation or year-round use.

Safety and Installation Guidelines:
• The Extra Low Voltage Transformer must always remain indoors and/or undercover at all times. Keep transformer
away from water. Use the product only with the transformer supplied. Always disconnect from the power supply
when not in use.
• Avoid placing the inflatable near heaters, fireplaces, candles, or other sources of heat.
• Protect the product from sharp objects that may cause punctures or tears. Ensure the ground is clear of debris
and sharp objects before setting up.
• Do not insert hands or fingers into the fan or electrical components.
• Avoid keeping the inflatable inflated during high winds or wet weather.

Weather Considerations:
This inflatable is safe for outdoor use with extra low voltage, but it is not suitable for all weather conditions. Avoid using (inflating) in windy conditions or during wet weather. During heavy rain, it is recommended to either move the deflated item undercover or adjust its position, so the fan does not face upwards or sit in pooled water. Do not deflate inflatable and leave out in the rain. Water entering the fan can impair its function. If the fan is damaged, it cannot be replaced, and the product will need to be disposed of.

Water in the motor is not covered under warranty. Some rips and tears are also not covered under the inflatable’s products warranty.

Safe Setup and Use:
It is important to follow the following instructions for set up and use: not following this step-by-step process may void the products warranty.

1. Choose the Right Location: Select a flat, visible, and secure area near an electrical outlet or use an
extension cord. Ensure the ground is clear of debris and sharp objects.
2. Unpack and Unfold: Remove the inflatable from its packaging and unfold carefully.
3. Ensure the zipper on the inflatable is fully closed.
4. Plug the transformer into a power outlet and turn it on. The fan will begin inflating the item immediately.
Ensure the fan is not covered by the product’s material and has good airflow for efficient inflation.
5. After the inflatable has fully inflated, ensuring it is well positioned, secure the inflatable to the ground or
adjoining structures using pegs, ties, and the tabs attached to the product.

Maintenance:
• Regularly inspect and adjust tie-down points and tabs for signs of wear.
• Limit operation of the inflatable to no more than 12 hours at a time to avoid overheating and damage.
• Avoid keeping the inflatable inflated during high winds or wet weather; store the product indoors or
undercover in such conditions.